alfer® aluminium

Installation tips

Tips about clipstech®

Surface height ranges

Table CL 01: ... for clipstech® cover strips, 33 mm
Table CL 02: ... for clipstech® cover strips, 46 mm
Table CL 03: ... für clipstech® level compensator profiles, 40 mm
Table CL 04: ... für clipstech® level compensator profiles, 56 mm
Table CL 05: ... for clipstech® wall edging profiles, 32 mm
Table CL 06: ... for clipstech® edging profile
Table CL 07: ... for clipstech®-plus cover strips, 46 mm
Table CL 08: ... for clipstech®-plus level compensator profiles, 56 mm
Table CL 09: ... for clipstech®-plus cover strips, 46 mm
Table CL 10: ... for clipstech®-plus level compensator profiles, 56 mm

Table CL 01: clipstech® cover strips, 33 mm

Level differences of up to 9.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.
	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 4.5 mm 7.0 mm 9.5 mm 12.0 mm 19.0 mm

to dim. b 6.5 mm 9.0 mm 11.5 mm 15.0 mm 22.0 mm

from dim. a 0.0 mm 1.5 mm 4.0 mm 6.5 mm 13.5 mm

to dim. b 8.5 mm 11.0 mm 13.5 mm 16.0 mm 23.0 mm

Table CL 02: clipstech® cover strips, 46 mm

Level differences of up to 11.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.
	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 5.0 mm 8.0 mm 11.0 mm 14.0 mm 19.5 mm

to dim. b 7.5 mm 10.5 mm 13.5 mm 16.5 mm 23.5 mm

from dim. a 0.0 mm 1.0 mm 3.5 mm 6.0 mm 13.0 mm

to dim. b 8.0 mm 12.5 mm 15.0 mm 17.5 mm 24.5 mm

Table CL 03: clipstech® level compensator profiles, 40 mm


Level differences from 6.0 mm up to zu 17.0 mm be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for the bend-up technology.
	Bend-up technology	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 4.5 mm 7.0 mm 9.5 mm 12.0 mm 19.0 mm

to dim. b 6.5 mm 9.0 mm 11.5 mm 15.0 mm 22.0 mm

dim. c 0.0 mm 2.5 mm 5.0 mm 7.5 mm 14.5 mm

from dim. a –6.5 mm –4.0 mm –1.5 mm 1.0 mm 8.0 mm

to dim. b 10.5 mm 13.0 mm 15.5 mm 18.0 mm 25.0 mm

Table CL 04: clipstech® level compensator profiles, 56 mm

Level differences from 9.0 mm up to 22.0 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.

	Bend-up technology	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 5.0 mm 8.0 mm 11.0 mm 14.0 mm 19.5 mm

to dim. b 7.5 mm 10.5 mm 13.5 mm 16.5 mm 23.5 mm

dim. c –2.0 mm 0.0 mm 2.5 mm 5.0 mm 12.0 mm

from dim. a –10.0 mm –7.5 mm –4.5 mm –2.5 mm 4.0 mm

to dim. b 12.0 mm 14.5 mm 17.0 mm 19.5 mm 16.5 mm

Table CL 05: clipstech® wall edging profiles, 32 mm

2.0 mm impact noise insulation (green) was taken into consideration for the bend-up technology.
	Bend-up technology

Color Support profile white ivory gray caramel brown

from dim. a 5.0 mm 8.0 mm 11.0 mm 14.0 mm 19.5 mm

to dim. b 7.5 mm 10.5 mm 13.5 mm 16.5 mm 23.5 mm

Table CL 06: clipstech® edging profiles

The 27 mm profile used as a step edging is combined with the corresponding support profile depending on the height of the surface. 2.0 mm impact noise insulation (green) was taken into consideration for the bend-up technology.

	Bend-up technology

Color Support profile white ivory caramel brown

Profile dim. 12.5 mm 15.0 mm 20.0 mm 27.0 mm

to dim. a 5.0 mm 8.0 mm 12.5 mm 19.5 mm

to dim. b 7.5 mm 12.5 mm 16.5 mm 23.5 mm

Table CL 07: clipstech®-plus cover strips, 46 mm

Level differences of up to 11.0 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.
	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Height Support profile 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from dim. a 4.0 mm 7.5 mm 11.0 mm 14.5 mm

to dim. b 7.0 mm 10.5 mm 14.0 mm 17.5 mm

from dim. a 0.0 mm 1.5 mm 5.0 mm 8.5 mm

to dim. b 7.5 mm 12.5 mm 16.0 mm 19.5 mm

Table CL 08: clipstech®-plus level compensator profiles, 56 mm

Level differences from 8.0 mm up to 21.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for the bend-up technology.

	Bend-up technology	Pivoting wing technology for coverings of different heights

Height Support profile 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from dim. a 4.0 mm 7.5 mm 11.0 mm 14.5 mm

to dim. b 7.0 mm 10.5 mm 14.0 mm 17.5 mm

dim. c –2.5 mm 0.0 mm 3.5 mm 7.0 mm

from dim. a –10.5 mm –7.0 mm –3.5 mm 0.0 mm

to dim. b 11.0 mm 14.5 mm 18.0 mm 21.5 mm

Table CL 09: clipstech®-plus cover strips, 46 mm

Level differences of up to 11.0 mm can be compensated.
Level differences of up to 11.0 mm can be compensated.	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Height Support profile Renovation 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from
dim. a 6.0 mm 9.5 mm 13.0 mm 16.5 mm

to
dim. b
9.0 mm 12.5 mm 16.0 mm 19.5 mm

from
dim. a
0.0 mm 3.5 mm 7.0 mm 10.5 mm

to
dim. b
9.5 mm 14.5 mm 18.0 mm 21.5 mm

Table CL 10: clipstech®-plus level compensator profiles, 56 mm

Level differences from 8.0 mm up to 21.5 mm can be compensated.
	Bend-up technology	Pivoting wing technology for coverings of different heights

Height Support profile Renovation 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from
dim. a 6.0 mm 9.5 mm 13.0 mm 16.5 mm

to
dim. b 9.0 mm 12.5 mm 16.0 mm 19.5 mm

dim. c

–2.5 mm 0.0 mm 3.5 mm 7.0 mm

from
dim. a –10.5 mm –7.0 mm –3.5 mm 0.0 mm

to
dim. b 11.0 mm 14.5 mm 18.0 mm 21.5 mm

Would you like complete information about our ranges and different products, or are you looking for a particular item, a matching color, or an item number?
Download our current information from the Download area as PDF files.