alfer® aluminium

Parquet and laminate profiles

clipstech® cover strips, 33 mm and 46 mm

The 33 mm wide alfer® clipstech® cover strips of anodized aluminium bridge expansion joints between two same-height floor coverings permanently and compensate slight level differences of up to 9.5 mm between floor coverings. They are ideally suited for application directly under front doors and interior doors. For floor covering height ranges see Table CL 01
The 46 mm wide alfer® clipstech® cover strips compensate slight level differences of up to 11.5 mm between two floor coverings. For floor covering height ranges see Table CL 02.
With both clipstech® cover strips rough edges are covered, necessary expansion joints are maintained. Easy clip-on mounting.

Table CL 01: clipstech® cover strips, 33 mm

Level differences of up to 9.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.
	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 4.5 mm 7.0 mm 9.5 mm 12.0 mm 19.0 mm

to dim. b 6.5 mm 9.0 mm 11.5 mm 15.0 mm 22.0 mm

from dim. a 0.0 mm 1.5 mm 4.0 mm 6.5 mm 13.5 mm

to dim. b 8.5 mm 11.0 mm 13.5 mm 16.0 mm 23.0 mm

Table CL 02: clipstech® cover strips, 46 mm

Level differences of up to 11.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for both technologies.
	Bend-up technology for coverings of the same height	Pivoting wing technology for coverings of different heights

Color Support profile white ivory gray caramel brown

from dim. a 5.0 mm 8.0 mm 11.0 mm 14.0 mm 19.5 mm

to dim. b 7.5 mm 10.5 mm 13.5 mm 16.5 mm 23.5 mm

from dim. a 0.0 mm 1.0 mm 3.5 mm 6.0 mm 13.0 mm

to dim. b 8.0 mm 12.5 mm 15.0 mm 17.5 mm 24.5 mm

User tips

Mounting the clipstech®-plus decor profiles is quite simple. The decor profile is placed on the support profile so that the joint pan and head are opposite. Use a hammer and a padded wood block to firmly tap the decor profile onto the support profile.

Download our current product information
from the Download area as PDF files.

Important note: Please understand that we only supply to DIY stores and
specialist retailers. Only our model construction range is available
from our e-shop at www.alfer-shop.com.