alfer® aluminium

Parquet and laminate profiles

clipstech®-plus level compensator profiles, 56 mm NEW

alfer®-clipstech®-plus level compensator profiles of anodized aluminium bridge expansion joints between two same-height floor coverings permanently and compensate level differences of up to 21.5 mm between floor coverings. The screwable system is clipped onto the extremely resilient clipstech®-plus support profiles and fixed with self-cutting countersunk screws in matching colors. Rough edges are covered, necessary expansion joints are maintained.
You will find the surface height ranges in Table CL 08 for the clipstech®-plus support profile and in Table CL 10 for the clipstech®-plus renovation support profile.

Table CL 08: clipstech®-plus level compensator profiles, 56 mm

Level differences from 8.0 mm up to 21.5 mm can be compensated. 2.0 mm impact noise insulation (green) was taken into consideration for the bend-up technology.

	Bend-up technology	Pivoting wing technology for coverings of different heights

Height Support profile 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from dim. a 4.0 mm 7.5 mm 11.0 mm 14.5 mm

to dim. b 7.0 mm 10.5 mm 14.0 mm 17.5 mm

dim. c –2.5 mm 0.0 mm 3.5 mm 7.0 mm

from dim. a –10.5 mm –7.0 mm –3.5 mm 0.0 mm

to dim. b 11.0 mm 14.5 mm 18.0 mm 21.5 mm

Table CL 10: clipstech®-plus level compensator profiles, 56 mm

Level differences from 8.0 mm up to 21.5 mm can be compensated.
	Bend-up technology	Pivoting wing technology for coverings of different heights

Height Support profile Renovation 9.5 mm 13.0 mm 16.5 mm 20.0 mm

from
dim. a 6.0 mm 9.5 mm 13.0 mm 16.5 mm

to
dim. b 9.0 mm 12.5 mm 16.0 mm 19.5 mm

dim. c

–2.5 mm 0.0 mm 3.5 mm 7.0 mm

from
dim. a –10.5 mm –7.0 mm –3.5 mm 0.0 mm

to
dim. b 11.0 mm 14.5 mm 18.0 mm 21.5 mm

User tips

Mounting the clipstech®-plus decor profiles is quite simple: the decor profile is placed on the support profile so that the joint pan and head are opposite. Use a hammer and a padded wood block to firmly tap the decor profile onto the support profile. Afterwards the decor profile is simply screwed down with the special color coordinated screws, which center themselves on the grooved pivot head.

Download our current product information
from the Download area as PDF files.

Important note: Please understand that we only supply to DIY stores and
specialist retailers. Only our model construction range is available
from our e-shop at www.alfer-shop.com.