Parquet and laminate profiles
clipstech®-plus accessories NEW
Profile sawing aid
Suitable for all clipstech®-plus support profiles. The alfer® profile sawing aid is adapted to all decor profiles of the clipstech® system so that they can be quickly and safely clamped in saws or miter boxes without scratching the visible surface.
Mounting aid
The alfer® mounting aids are clipped onto the support profiles prior to laying the floor covering and thus ensure precise positioning of the support profiles on doors, walls, etc. They also facilitate precise, flush connection of support profiles that have been placed on each other and ensure that sufficient expansion joint clearances are maintained when laying the coverings.
Countersunk screws, self-cutting, color coordinated
The countersunk screws are made of galvanized steel and available in colors matching the anodized clipstech®-plus profiles.
Round-headed screws with plugs
For assembling both types of clipstech®-plus supports. The 10 round-headed screws made of galvanized steel are available with matching plugs in a self-service bag.
clipstech®-plus accessories NEW
Profile sawing aid
Suitable for all clipstech®-plus support profiles. The alfer® profile sawing aid is adapted to all decor profiles of the clipstech® system so that they can be quickly and safely clamped in saws or miter boxes without scratching the visible surface.
Mounting aid
The alfer® mounting aids are clipped onto the support profiles prior to laying the floor covering and thus ensure precise positioning of the support profiles on doors, walls, etc. They also facilitate precise, flush connection of support profiles that have been placed on each other and ensure that sufficient expansion joint clearances are maintained when laying the coverings.
Countersunk screws, self-cutting, color coordinated
The countersunk screws are made of galvanized steel and available in colors matching the anodized clipstech®-plus profiles.
Round-headed screws with plugs
For assembling both types of clipstech®-plus supports. The 10 round-headed screws made of galvanized steel are available with matching plugs in a self-service bag.
User tips
The sawing aid is adapted to the decor profiles in such a way as to allow them to be quickly and safely clamped in saws or cutting machines.
Miter cuts: The decor profiles are bent into shape by means of the pivoting or bending mechanism when installed according to the height of the floor coverings. Therefore the marks for the miter cuts should only be made once they are clipped into position. There are two options:
1. Take the end of the decor profile requiring the miter cut and clip about 10 cm of it onto the support profile that is already fixed to the floor. Mark the required angle of the miter cut and carefully remove the decor profile for sawing.
2. Simulate the subsequent assembly using left-over pieces of floor covering, underlay, and the support profile fastened to a wooden panel, for example, and clip on at least 10 cm of the decor profile. Mark and then saw the miter cut.
In both cases you can correct the sawn cut if necessary by filing afterwards.
The sawing aid is adapted to the decor profiles in such a way as to allow them to be quickly and safely clamped in saws or cutting machines.
Miter cuts: The decor profiles are bent into shape by means of the pivoting or bending mechanism when installed according to the height of the floor coverings. Therefore the marks for the miter cuts should only be made once they are clipped into position. There are two options:
1. Take the end of the decor profile requiring the miter cut and clip about 10 cm of it onto the support profile that is already fixed to the floor. Mark the required angle of the miter cut and carefully remove the decor profile for sawing.
2. Simulate the subsequent assembly using left-over pieces of floor covering, underlay, and the support profile fastened to a wooden panel, for example, and clip on at least 10 cm of the decor profile. Mark and then saw the miter cut.
In both cases you can correct the sawn cut if necessary by filing afterwards.
Download our current product information
from the Download area as PDF files.
Important note: Please understand that we only supply to DIY stores and
specialist retailers. Only our model construction range is available
from our e-shop at www.alfer-shop.com.
|
|||||||
 |
|||||||
| ©2007 · alfer® aluminium Gesellschaft mbH · Horheim, Industriestraße 7 · D-79793 Wutöschingen, Germany |